Endress+Hauser Proline Prowirl 73 - Identification; Device Designation

Proline Prowirl 73 Installation
Endress+Hauser
13
2.3.4 Mounting the transmitter (remote version)
Mounted directly on the wall
Pipe mounting
A0008735
A0008736
"
Caution!
If the device is mounted to a warm pipe, make sure that
the housing temperature does not exceed the maximum
permissible value:
•Standard:
–40 to +80 °C (–40 to +176 °F)
• EEx d version:
–40 to +60 °C (–40 to +140 °F)
• ATEX II 1/2 GD version/dust ignition-proof:
–20 to +55 °C (–4 to +131 °F)
ANSCHLUSSKLEMMEN - FIELD TERMINALS
mm (inch)
220 / *214
(8.66 / *8.43)
ANSCHLUSSKLEMMEN - FIELD TERMINALS
Ø 20…70
(Ø 0.79…2.75)
mm (inch)
215/ *209
(8.46 / *8.23)