Endress+Hauser Proline Prowirl 73 - Operation

Proline Prowirl 73 Commissioning
Endress+Hauser
23
5.2 Operation
5.2.1 Display elements
5.2.2 Operating elements
!
Note!
The operating elements described here are only available for measuring devices with local
operation. Measuring devices without local operation are operated via the fieldbus in question.
5.2.3 Displaying error messages
A0007557
Display lines/fields
1. Main line for primary measured values
2. Additional line for additional measured
variables/status variables
3. Current measured values
4. Engineering units/time units
+48.25 xx/yy
+3702.6 x
1
2
3
4
A0007559
Operating keys
1. (–) Minus key for entering, selecting
2. (+) Plus key for entering, selecting
3. Enter key for calling the function matrix, saving
When the +/– keys are pressed simultaneously (Esc):
• Exit the function matrix step-by-step:
• > 3 sec. = cancel data input and
return to the measured value display
A0007561
1. Type of error:
P = Process error, S = System error
2. Error message type:
$ = Fault message, ! = Notice message
3. Error number
4. Duration of the last error that occurred:
Hours: Minutes: Seconds
5. Error designation
• List of the most common error messages during
commissioning  ä 30
• List of all error messages, see associated Operating
Instructions on the CD-ROM
Esc
E
+
-
1 2 3
XXXXXXXXXX
#000 00:00:05
P
3 4
2
1 5