Endress+Hauser Proline Prowirl R 200 - Simulation

Commissioning Proline Prowirl R 200 HART
122 Endress+Hauser
Options Description
Duplicate The transmitter configuration from another device is duplicated to the device using
the display module.
Clear backup data The backup copy of the device configuration is deleted from the display module of
the device.
HistoROM backup
A HistoROM is a "non-volatile" device memory in the form of an EEPROM.
While this action is in progress, the configuration cannot be edited via the local
display and a message on the processing status appears on the display.
10.7 Simulation
The Simulation submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).
Navigation
"Diagnostics" menu → Simulation
‣
Simulation
Assign simulation process variable
→  123
Process variable value
→  123
Current input 1 simulation
→  123
Value current input 1
→  123
Current output 1 to n simulation
→  123
Value current output 1 to n
→  123
Frequency output simulation
→  123
Frequency value
→  123
Pulse output simulation
→  124
Pulse value
→  124
Switch output simulation
→  124
Switch status
→  124
Device alarm simulation
→  124