Repairs Proline Prowirl R 200 HART
166 Endress+Hauser
14 Repairs
14.1 General notes
14.1.1 Repair and conversion concept
The Endress+Hauser repair and conversion concept provides for the following:
• The measuring devices have a modular design.
• Spare parts are grouped into logical kits with the associated Installation Instructions.
• Repairs are carried out by Endress+Hauser Service or by appropriately trained customers.
• Certified devices can only be converted to other certified devices by Endress+Hauser
Service or at the factory.
14.1.2 Notes for repair and conversion
For repair and modification of a measuring device, observe the following notes:
‣
Use only original Endress+Hauser spare parts.
‣
Carry out the repair according to the Installation Instructions.
‣
Observe the applicable standards, federal/national regulations, Ex documentation (XA)
and certificates.
‣
Document every repair and each conversion and enter them into the W@M life cycle
management database.
14.2 Spare parts
Some interchangeable measuring device components are listed on an overview sign in the
connection compartment cover.
The spare part overview sign contains the following information:
• A list of the most important spare parts for the measuring device, including their
ordering information.
• The URL for the W@M Device Viewer (www.endress.com/deviceviewer):
All the spare parts for the measuring device, along with the order code, are listed here
and can be ordered. If available, users can also download the associated Installation
Instructions.
To Next Page
Loading...
