Proline Prowirl R 200 HART Technical data
Endress+Hauser 199
Pressure ratings PN 10/16/25/40, Class 150/300, as well as JIS 10K/20K:
Parts in contact with medium (marked as "wet" on the DSC sensor flange):
• Stainless steel 1.4404 and 316 and 316L
• Compliant with:
– NACE MR0175/ISO 15156-2015
– NACE MR0103/ISO 17945-2015
Parts not in contact with medium:
Stainless steel 1.4301 (304)
Order code for "Sensor version; DSC sensor; measuring tube", option AB, BB, CB
Pressure ratings PN 10/16/25/40, Class 150/300, as well as JIS 10K/20K:
Parts in contact with medium (marked as "wet" on the DSC sensor flange):
• Alloy C22, UNS N06022 similar to Alloy C22/2.4602
• Compliant with:
– NACE MR0175/ISO 15156-2015
– NACE MR0103/ISO 17945-2015
Parts not in contact with medium:
Alloy C22, UNS N06022 similar to Alloy C22/2.4602
Pressure measuring cell
The "mass" sensor version (integrated pressure/temperature measurement) is
available only for measuring devices in the HART communication mode.
• Wetted parts:
– Process connection
Stainless steel, 1.4404/316L
– Membrane
Stainless steel, 1.4435/316L
• Non-wetted parts:
Housing
Stainless steel ,1.4404
Order code for "Sensor version; DSC sensor; measuring tube", option DA, DB
• Siphon
5)
Stainless steel ,1.4571
• Adjusting nut
Stainless steel ,1.4571
• Pressure gauge valve
Stainless steel ,1.4571
• Welded connection on meter body
Stainless steel, multiple certifications 1.4404/316/316L
• Seals
Copper
Process connections
DN 25R to 200R (1R to 8R")/DN 40S to 250S (1½S to 10S"), pressure ratings PN
10/16/25/40, Class 150/300, as well as JIS 10K/20K:
• "R-type" with single inner diameter line size reduction: 25R to 200R (1R to 8R")
Compliant with:
– NACE MR0175-2003
– NACE MR0103-2003
• "S-type" with double inner diameter line size reduction: DN 40S to 250S (1½S to 10S")
Compliant with:
– NACE MR0175-2003
– NACE MR0103-2003
5) Only with order code for "Sensor version; DSC sensor; measuring tube", option DA available.
To Next Page
Loading...
