Technical data Proline Prowirl R 200 HART
200 Endress+Hauser
The following materials are available depending on the pressure rating:
Stainless steel, multiple certifications, 1.4404/F316/F316L)
List of all available process connections
Seals
• Graphite (standard)
Sigraflex foil
TM
(BAM-tested for oxygen applications, "high-grade in the context of TA-
Luft Clean Air Guidelines")
• FPM (Viton
TM
)
• Kalrez 6375
TM
• Gylon 3504
TM
(BAM-tested for oxygen applications, "high-grade in the context of TA-
Luft clean air guidelines")
Order code for "Sensor version; DSC sensor; measuring tube", option DA, DB
Copper
Housing support
Stainless steel, 1.4408 (CF3M)
Screws for DSC sensor
• Order code for "Sensor version", option AA, BA, CA, DA, DB
Stainless steel, A2-80 according to ISO 3506-1 (304)
• Order code for "Additional approval", option LL "AD 2000 (including option JA+JB+JK) >
DN25 including option LK"
Stainless steel, A4-80 according to ISO 3506-1 (316)
• Order code for "Sensor version", option AB, AC, BB, CB, CC
Stainless steel, 1.4980 according to EN 10269 (Gr. 660 B)
Accessories
Protective cover
Stainless steel, 1.4404 (316L)
Flow conditioner
• Stainless steel, multiple certifications, 1.4404 (316, 316L)
• Compliant with:
– NACE MR0175-2003
– NACE MR0103-2003
Process connections DN 25R to 200R (1R to 8R")/DN 40S to 250S (1½S to 10S"), pressure ratings PN
10/16/25/40, Class 150/300, as well as JIS 10K/20K:
• "R-type" with single inner diameter line size reduction: 25R to 200R (1R to 8R")
Compliant with:
– NACE MR0175-2003
– NACE MR0103-2003
• "S-type" with double inner diameter line size reduction: DN 40S to 250S (1½S to 10S")
Compliant with:
– NACE MR0175-2003
– NACE MR0103-2003
The following materials are available depending on the pressure rating:
Stainless steel, multiple certifications, 1.4404/F316/F316L)
List of all available process connections
To Next Page
Loading...
