Endress+Hauser Proline Prowirl R 200 - Terminal Assignment

Proline Prowirl R 200 HART Electrical connection
Endress+Hauser 37
7.1.4 Terminal assignment
Transmitter
4-20 mA HART connection version with additional inputs and outputs
3 4 1 2
4
5 6
+ – + –+ –
123
A0033475
3 4 1 2
4
5 6
+ – + –+ –
123
A0033475
Maximum number of terminals
Terminals 1 to 6:
Without integrated overvoltage protection
Maximum number of terminals for order code for
"Accessory mounted", option NA "Overvoltage
protection"
• Terminals 1 to 4:
With integrated overvoltage protection
• Terminals 5 to 6:
Without integrated overvoltage protection
1
2
3
4
Output 1 (passive): supply voltage and signal transmission
Output 2 (passive): supply voltage and signal transmission
Input (passive): supply voltage and signal transmission
Ground terminal for cable shield
Order code for "Output" Terminal numbers
Output 1 Output 2 Input
1 (+) 2 (-) 3 (+) 4 (-) 5 (+) 6 (-)
Option A 4-20 mA HART (passive) - -
Option B
1)
4-20 mA HART (passive)
Pulse/frequency/switch
output (passive)
-
Option C
1)
4-20 mA HART (passive) 4-20 mA analog (passive) -
Option D
1) 2)
4-20 mA HART (passive)
Pulse/frequency/switch
output (passive)
4-20 mA current input
(passive)
1) Output 1 must always be used; output 2 is optional.
2) The integrated overvoltage protection is not used with option D: Terminals 5 and 6 (current input) are not
protected against overvoltage.