Endress+Hauser Proline Prowirl R 200 - Page 77

Proline Prowirl R 200 HART Commissioning
Endress+Hauser 77
Energy unit
→  78
Calorific value unit
→  78
Calorific value unit
→  79
Velocity unit
→  79
Density unit
→  79
Specific volume unit
→  79
Dynamic viscosity unit
→  79
Length unit
→  79
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Volume flow unit – Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• m³/h
• ft³/min
Volume unit – Select volume unit. Unit choose list Country-specific:
• m³
• ft³
Mass flow unit – Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min
Mass unit – Select mass unit. Unit choose list Country-specific:
• kg
• lb
Corrected volume flow unit – Select corrected volume flow
unit.
Result
The selected unit applies for:
Corrected volume flow
parameter (→  137)
Unit choose list Country-specific:
• Nm³/h
• Sft³/h
Corrected volume unit – Select corrected volume unit. Unit choose list Country-specific:
• Nm³
• Sft³