Endress+Hauser Proline Prowirl R 200 - Setting the Medium Properties

Proline Prowirl R 200 HART Commissioning
Endress+Hauser 97
‣
SIL confirmation
‣
Deactivate SIL
‣
Display
→  116
‣
Heartbeat setup
‣
Configuration backup display
→  118
‣
Administration
→  120
10.5.1 Setting the medium properties
In the Medium properties submenu the reference values for the measuring application
can be set.
Navigation
"Setup" menu → Advanced setup → Medium properties
‣
Medium properties
Enthalpy type
→  98
Calorific value type
→  98
Reference combustion temperature
→  98
Reference density
→  98
Reference gross calorific value
→  98
Reference pressure
→  99
Reference temperature
→  99
Reference Z-factor
→  99
Linear expansion coefficient
→  99
Relative density
→  99
Specific heat capacity
→  99
Calorific value
→  100
Z-factor
→  100
Dynamic viscosity
→  100