Accessories Proline t-mass 65 PROFIBUS DP/PA
88 Endress+Hauser
8.3 Service-specific accessories
Accessory Description Order code
Applicator Software for selecting and sizing Endress+Hauser measuring
devices:
• Calculation of all the necessary data for identifying the
optimum flowmeter: e.g. nominal diameter, pressure loss,
accuracy or process connections
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related
data and parameters over the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
DKA80 - *
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software package,
test results can be imported into a database, printed and used for
official certification.
Contact your Endress+Hauser representative for more
information.
50098801
FieldCare FieldCare is Endress+Hauser's FDT based Plant Asset
Management Tool. It can configure all intelligent field devices in
your plant and supports you in managing them. By using status
information, it also provides a simple but effective means of
checking their health.
Please refer to the
product page of the
Endress+Hauser Internet
page:
www.endress.com
FXA193 The FXA193 service interface connects the device to the PC for
configuration via FieldCare.
FXA193 – *
To Next Page
Loading...
