Endress+Hauser Promag 100 - Promag, Promass, Prosonic Flow, T-Mass 500-Digital

EA01018D
22 Endress+Hauser
9.5.1 Reassembling the transmitter housing
Reassembly is carried out in reverse order.
10 Promag, Promass, Prosonic Flow, t-mass 500-digital
10.1 Aluminum and polycarbonate transmitter housing
10.2 Backing up the data
A.) Read and note the parameters on the display and save them to the new electronics
module following replacement, or
B.) Read out the parameters from the T-DAT via the web browser (Data management /
Device configuration / Upload settings from device) using the parameter download
function, save the .xml file to the PC and, using the "Download settings to device"
function, save the parameters to the new electronics module.
10.3 Replacing the T-DAT, aluminum transmitter housing
1 → 2
T20
1.
2.
-
+
-
ESC
10.3.1 Reassembling the aluminum transmitter housing
Reassembly is carried out in reverse order.