Endress+Hauser Promag 53 - Page 159

Promag 53 PROFIBUS-DP/-PA 10 Technical data
Endress+Hauser 159
Promag H / DN 40...100 (remote version)
Fig. 76: Dimensions Promag H / DN 40...100 (remote version)
Dimensions of wall-mount housing
→ see Page 145
DN PN DI L A B C K M
DIN
[mm]
ANSI
[inch]
DIN
[bar]
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
40 1 1/2" 16 35.3 140 216 151.5 64.5 129 M 6x4
50 2" 16 48.1 140 241 164.0 77.0 154 M 8x4
65 2 1/2" 16 59.9 140 241 164.0 77.0 154 M 8x4
80 3" 16 72.6 200 290 188.5 101.5 203 M 12x4
100 4" 16 97.5 200 290 188.5 101.5 203 M 12x4
Fitting length depends on process connections
→ Page 168 ff.
F06-xxHxxxxx-06-05-xx-xx-000