Endress+Hauser Prosonic M FMU40 - Scope of Delivery; Certificates and Approvals

Prosonic M - FOUNDATION Fieldbus Identification
Endress+Hauser 15
2.7 Scope of delivery
2.7.1 Instrument and accessories
• Instrument according to the version ordered
• Accessories ( ä 69)
• Brief operating instructions KA01064F/00/EN for quick commissioning
• Brief operating instructions KA00183F/00/A2 (basic setup/troubleshooting), housed in the
instrument)
• For certified instrument versions: Safety Instructions, Control- or Installation drawings
• For FMU40 *R**** and FMU41 *R****: counter nut (PC)
• For FMU40/41: sealing ring (EPDM)
• For gland M20x1.5:
– 1 cable gland for 2-wire instruments
– 2 cable glands for 4-wire instruments
The cable glands are mounted on delivery.
• Endress+Hauser operating program on the enclosed CD-ROM
• CD-ROM with further documentation, e. g.
- Technical Information
- Operating Instructions
- Description of Intrument Functions
!
Note!
Additional safety instructions (XA, ZE, ZD) are supplied with certified device versions. Refer to the
nameplate for the names of the safety instructions that apply to your device version.
2.8 Certificates and approvals
CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EC directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.9 Registered trademarks
FOUNDATION™ Fieldbus
Registered trademark of Fieldbus FOUNDATION Austin, Texas, USA
FieldCare
®
Trademark of Endress+Hauser Process Solutions AG.
ToF
®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
PulseMaster
®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany