Maintenance and repairs Prosonic M - FOUNDATION Fieldbus
68 Endress+Hauser
8.6 Return
Returning devices
The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at www.services.endress.com/return-material
8.7 Disposal
In case of disposal please seperate the different components according to their material consistence.
8.8 Software history
8.9 Contact addresses of Endress+Hauser
Contact addresses can be found on our homepage: www.endress.com/worldwide. If you have any
questions, please contact your Endress+Hauser sales representative.
Software version / date Changes to software Changes to documentation
V 01.02.00 / 01.2002
V 01.02.02 / 03.2003
Original software
Compatible with:
• ToF Tool
• Commuwin II (version 2.05.03 and
higher
• HART Communicator DXR 275 (from
OS 4.6) with Rev. 1, DD 1
V 01.02.04 / 02.2004 • FMU42 added
• compatible with HART Communicator
DXR375
FMU42 added
V 01.04.00 / 07.2006 • "detection window" function added
can be operated via:
• ToF Tool from version 4.50
• HART Communicator DXR375 with
Rev. 1, DD1
FOUNDATION Fieldbus Transducer Block
divided into:
•Sensor Block
• Diagnostic Block
•Display Block
Execution time of the function blocks
reduced:
• AI: 30 ms
• PID: 80 ms
•AR: 50 ms
•IS: 30 ms
•SC: 40 ms
•IT: 60 ms
"detection window" added
Version: 07.06
Description of FOUNDATION Fieldbus
interface completely revised.
Version: 11.06
To Next Page
Loading...
