The "output/calculations" menu (for HART instruments)
126
6.1 The "allocation/calculations" submenu
6.1.1 "allocation current N " (N = 1 or 2)
"output"
Allocates a measured or calculated value to the current output.
Selection:
The available options depend on the instrument version, the connected sensors and the instrument
configuration. The following measured and calculated values may occur:
• level 1
• level 2
• flow 1
• flow 2
• average level: (level1 + level2)/2
• level 1-2
• level 2-1
• level 1+2
• average flow
• flow 1-2
• flow 2-1
• flow 1+2
• backwater ratio
downstream/upstream
• rake control ratio
downstream/upstream
"output current"
Displays the output current (mA).
⇒
allocat. curr. 1 O1201
output:
output current:
To Next Page
Loading...
