The "output/calculations" menu (for Profibus DP instruments)
133
7 The "output/calculations" menu (for
Profibus DP instruments)
The "output/calculations" menu is used to configure the Analog Input blocks (AI) and the Digital
Input blocks (DI). These blocks transfer analog or digital values to a SPS.
7.1 "analog input" (AI)
7.1.1 "output/calculations"
Use this list to select the AI block you are going to configure.
7.1.2 "analog input N" (N = 1 - 10)
"measured value N" (N = 1 - 10)
Use this parameter to select the measured or calculated variable which is transferred by the AI block.
"value"
Displays the current value of the measured or calculated variable.
"status"
Displays the status which is transferred with the measured value.
⇒
main menu CX001
output calculat.
device properties
system information
⇒
output/calculat. 01000
analog input
digital input
Profibus DP
⇒
output calculat. 0XA01
analog input 1
analog input 2
analog input 3
analog input 4
⇒
analog input 1 01A02
measured value 1:
value:
status:
To Next Page
Loading...
