Endress+Hauser Prosonic S FMU90 - Troubleshooting; 10.1 System error messages

The "output/calculations" menu (for Profibus DP instruments)
135
7.3 "Profibus DP"
This submenu is used to configure the general properties of the Profibus DP interface.
7.3.1 "Profibus DP"
"profile version"
Displays the version of the Profibus profiles used.
"instrument address"
Displays the instrument address.
!
Note!
There are two options for setting the instrument address:
• by the DIP switches in the terminal compartment
• by a configuration tool (e.g. FieldCare)
"ident number"
Defines the ident number of the instrument.
Selection:
• profile
The ident number of the profibus profiles is used.
• manufacturer (default)
The ident number of the instrument specific GSD files is used.
⇒
output/calculat. 01000
analog input
digital input
Profibus DP
⇒
Profibus DP O1C01
profile version:
instrument addr.:
ident number: