The "system information" menu
142
9.2 The "in/output info" submenu
17)
9.2.1 "level (LVL) N" (N = 1 or 2)
"input"
Indicates, which sensor input is connected to the level channel.
"sensor selection"
Displays the type of the connected sensor. For the sensors FDU9x, "automatic" is displayed, as these
sensors are automatically detected by the transmitter (They have not to be spedified by the user.)
"detected"
(only for "sensor selection" = automatic")
Displays the type of the automatically detected sensor.
9.2.2 "flow N" (N = 1 or 2)
"input"
Indicates, which sensor input is connected to the flow channel.
"sensor selection"
Displays the type of the connected sensor. For the sensors FDU9x, "automatic" is displayed, as these
sensors are automatically detected by the transmitter (They have not to be spedified by the user.)
"detected"
(only for "sensor selection" = automatic")
Displays the type of the automatically detected sensor.
17) This submenu can be accessed only by the display module (not by an operating software).
⇒
level (LVL) 1 IX107
input:
sensor selection:
detected:
⇒
flow 1 IX109
input:
sensor selection:
detected:
To Next Page
Loading...
