Commissioning
65
• table
In this linearization mode the measured value is calculated from a linearization table. The table
may consist of up to 32 pairs of values (level - volume). The table must be monotonically
increasing or decreasing.
The following additional parameters have to be specified:
– the unit of the linearized value, e.g. kg, m
3
, ft
3
, ... ("customer unit")
– the linearization table ("edit")
100%
20
mA
0%
0/4
mA
= kg,m
3
,
ft
3
, ...
To Next Page
Loading...
