Endress+Hauser Prothermo NMT81 - Mounting NMT81 on a Cone Roof Tank

Prothermo NMT81 Installation
Endress+Hauser 27
R
a
A0042789
 16 Installation and winding of a temperature probe
a 600 mm (23.62 in) or more
R 300 mm (11.81 in) or more
L
CAUTION
If bending the temperature probe with R smaller than 300 mm (11.81 in), it may damage
the probe and elements.
‣
Bend the probe 300 mm (11.81 in) or more.
5.9.3 Installation height adjustment
A unique feature of NMT81 is the optional ability to adjust height by approx.
±180 mm (7.09 in) from the original position.
The height adjustment feature is not available for the welded flange type and the converter-
only version.
5.10 Installation procedure
The length of the NMT81 probe is predetermined by the customer. Check the following items
before installing.
• Tag number on the device
• Length of the temperature probe
• Number of elements