Endress+Hauser Prothermo NMT81 - Anchor Weight (High Profile)

Accessories Prothermo NMT81
106 Endress+Hauser
14.1.2 Anchor weight (High profile)
This anchor weight was mainly designed for the converter + temperature probe version.
Even when an anchor weight is used for the installation, the bottom element (bottom
point temperature measurement position) will be set at approx. 500 mm (19.69 in) above
the tank bottom. When installing a high profile anchor weight from a nozzle at the top of
the tank, ensure that the nozzle opening is at least 150A (6").
ø ± ± 0.08)100 2 (3.94
136.3 5 (5.37 0.2)
± ±
103 2 (4.06 0.08)
± ±
1
2
A0041264
 110 Installation attachment. Unit of measurement mm (in)
1 Eyebolt
2 Weight
Description Details
Anchor weight JIS SS400 mild carbon steel
Eyebolt JIS SS400 mild carbon steel
Weight 6 kg (13.23 lb)