Endress+Hauser Prothermo NMT81 - Page 108

Accessories Prothermo NMT81
108 Endress+Hauser
14.1.4 Specification of anchor weight
The use of the available range for the anchor weight varies depending on the specification
or application of the tank. See the following chart for selection of the appropriate anchor
weight.
0 10
(32.8)
20
(65.61)
30
(98.43)
40
(131.23)
50
(164)
60
(196.85)
70
(229.66)
80
(262.47)
90
(295.28)
100
(328.1)
600
800
1000
400
1200
1400
1600
1800
2000
Unit of density [kg/m ]³
Unit of length m/(!)
Range for requirement of advance inquiry
Range for standard use
A0044243-EN
 112 Anchor weight selection chart
14.1.5 Wire hook
The actual tension is created by the securing wire between the wire hook and the top
anchor (SUS316, stranded wire with a diameter of 3 mm (0.12 in)).
48 (1.89)
2 (0.08)±
9
(0.35)
23
(0.91)
70 (2.76)
± 2 (0.08)
150 (5.91) 2 (0.08)±
200 (7.87) 2 (0.08)±
A0041263
 113 Wire hook. Unit of measurement mm (in)