Endress+Hauser Prothermo NMT81 - Page 54

Operability Prothermo NMT81
54 Endress+Hauser
Item Details
Level (see Note)
Displacer position (see Note)
AIO B1-3 value (see Note)
AIO C1-3 value (see Note)
AIP B4-8 value (see Note)
AIP C4-8 value (see Note)
Factory setting Dependent on the device version
Additional information Read access: Operator
Write access: Maintenance
Visibility depends on order options or device settings
Water level source
Item Details
Navigation Setup → Advanced setup → Application → Tank configuration → Level →
Water level source
Description Defines the source of the bottom water level.
Selection Manual value
Bottom level
HART device 1 ... 15 level
AIO B1-3 value
AIO C1-3 value
AIP B4-8 value
AIP C4-8 value
Factory setting The setting is different depending on the device.
Additional information Read access: Operator
Write access: Maintenance
The display will be different depending on the selected options and equipment
settings.