RIA15 Installation
Endress+Hauser 15
5 Installation
5.1 Incoming acceptance, transport, storage
Compliance with the permitted environmental and storage conditions is mandatory.
Precise specifications for this are provided in the "Technical data" .
5.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Is the packaging or the content damaged?
• Is the delivery complete? Compare the scope of delivery against the information on your
order form.
5.1.2 Transport and storage
Please note the following:
• Pack the device so that is protected against impact for storage and transport. The
original packaging provides optimum protection.
• The permitted storage temperature is –40 to +85 °C (–40 to +185 °F); it is possible to
store the device at borderline temperatures for a limited period (48 hours maximum).
5.2 Installation conditions
At temperatures below –25 °C (–13 °F) the readability of the display can no longer be
guaranteed.
5.2.1 Display unit in the panel-mount housing
Permitted ambient temperature range –40 to 60 °C (–40 to 140 °F), horizontal orientation.
IP65 protection at front, IP20 at rear
See "Technical data" section .
5.2.2 Display unit in the field housing
Permitted ambient temperature range –40 to 60 °C (–40 to 140 °F). IP67 protection,
NEMA 4x (aluminum housing).
See "Technical data" section .
5.3 Installation instructions
For the dimensions of the device, see "Technical data" → 53.
To Next Page
Loading...
