Endress+Hauser ria45 - Calculation Parameters

Appendix RIA45
62 Endress+Hauser
Description Resets the min./max. values saved.
Options no
yes
Factory setting no
Submenu "Calc value 1"/"Calc value 2"
Navigation

Setup → Calc value 1/Calc value 2
Additional information Settings for math 1 or math 2
Calculation
Navigation

Setup → Calc value 1/Calc value 2 → Calculation
Description Selects the calculation method.
Options off
Sum
Difference
Average
Lineariz. AI1 / Lineariz. AI2
Lineariz. CV1 (Calc value 2 only)
Multiplication
Factory setting off
Additional information If "Calculation" is set to "Off", all the parameters under it are hidden.
Tag
Navigation

Setup → Calc value 1/Calc value 2 → Tag
Description Channel name
User entry Customized text, max. 12 digits
Unit
Navigation

Setup → Calc value 1/Calc value 2 → Unit
Description Unit of the channel
User entry Customized text, max. 5 digits
Bar 0%
Navigation

Setup → Calc value 1/Calc value 2 → Bar 0%
Description Configures the 0%-value for the bar graph
User entry Numerical value
1)
Factory setting 0
Bar 100%
Navigation

Setup → Calc value 1/Calc value 2 → Bar 100%