Identification Process Display
24
G09-RIA452xx-18-00-xx-xx-000
Fig. 1: Nameplate of the process display unit (example)
1 Order code and serial number of the device
2Power supply
3 Software version number
4 Ambient temperature
5Performance
6 Name and address of manufacturer
2.2 Scope of delivery
The scope of delivery of the process display unit comprises:
• Process display unit for panel mounting
• Multilanguage Brief Operating Instructions as hard copy
• CD-ROM with PC configuration software and interface cable RS232 (optional)
• Fixing clips
• Sealing ring
2.3 Certificates and approvals
CE mark, declaration of conformity
The process display unit is designed to meet state-of-the-art safety requirements, has been
tested and left the factory in a condition in which it is safe to operate. The device meets the
relevant standards and directives as per IEC 61 010-1 "Safety requirements for electrical
equipment for measurement, control and laboratory use".
The device described in these Operating Instructions thus meets the legal requirements of the
EU directives. The manufacturer confirms that the device has been tested successfully by
affixing the CE mark.
Please note the device accessories in Section 'Accessories' in the Operating Instructions.
To Next Page
Loading...
