Endress+Hauser Waterpilot FMX21 - Cable Marking; Cable Shortening Kit

Installation Waterpilot FMX21
22 Endress+Hauser
5.9 Cable marking
A0030955
• To make installation easier, Endress+Hauser marks the extension cable if a customer-
specific length has been ordered.
Ordering information: Product Configurator order code for "Service", option "IR" or "IS".
• Cable marking tolerance (distance to lower end of level probe):
Cable length < 5 m (16 ft): ±17.5 mm (0.69 in)
Cable length > 5 m (16 ft): ±0.2 %
• Material: PET, stick-on label: acrylic
• Immunity to temperature change: –30 to +100 °C (–22 to +212 °F)
NOTICE
The marking is used exclusively for installation purposes.
‣
The mark must be thoroughly removed without trace in the case of devices with drinking
water approval. The extension cable must not be damaged in the process.
Not for use of the FMX21 in hazardous areas.
5.10 Cable shortening kit
See the Operating Instructions.