Waterpilot FMX21
Integrating device via HART
®
protocol
Endress+Hauser 33
7.2 Operating concept
Operation with an operating menu is based on an operation concept with "user roles" .
User role Meaning
Operator Operators are responsible for the devices during normal "operation". This is usually limited to the
reading of process values. If the work with the devices goes beyond reading, it concerns simple,
application-specific functions that are used in operation. Should an error occur, these users simple
forward the information on the errors but do not intervene themselves.
Maintenance Service engineers usually work with the devices in the phases following device commissioning. They are
primarily involved in maintenance and troubleshooting activities for which simple settings have to be
made at the device. Technicians work with the devices over the entire life cycle of the product. Thus,
commissioning and advanced settings and configurations are some of the tasks they have to carry out.
Expert Experts work with the devices over the entire life cycle of the device, but, in part, have high
requirements on the devices. Individual parameters/functions from the overall functionality of the
devices are required for this purpose time and again. In addition to technical, process-oriented tasks,
experts can also perform administrative tasks (e.g. user administration). "Experts" can avail of the entire
parameter set.
7.3 Structure of the operating menu
See the Operating Instructions.
7.4 Locking/unlocking operation
See the Operating Instructions.
7.5 Resetting to factory settings (reset)
See the Operating Instructions.
8
Integrating device via HART
®
protocol
See Operating Instructions.
To Next Page
Loading...
