About this document Waterpilot FMX21
4 Endress+Hauser
9.2 Unlocking/locking configuration .......................................................... 34
9.3 Commissioning ....................................................................... 34
9.4 Measuring mode selection ............................................................... 34
9.5 For selecting the pressure engineering unit .................................................. 35
9.6 Position adjustment ................................................................... 36
9.7 Configuring the damping ............................................................... 37
9.8 Configuring pressure measurement ........................................................ 37
9.9 Configuring level measurement ........................................................... 37
9.10 Automatic density compensation .......................................................... 41
9.11 Linearization ........................................................................ 41
9.12 Backing up or duplicating the device data .................................................... 41
9.13 Operation and settings via RIA15 ......................................................... 41
1 About this document
1.1 Document function
The Brief Operating Instructions contain all the essential information from incoming
acceptance to initial commissioning.
1.2 Symbols used
1.2.1 Safety symbols
Symbol Meaning
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
NOTE!
This symbol contains information on procedures and other facts which do not result in personal
injury.
To Next Page
Loading...
