Commissioning Waterpilot FMX21
42 Endress+Hauser
The device is operated using three operating keys on the front of the housing. The device
setup can be disabled with a 4-digit user code. If the setup is disabled, a padlock symbol
appears on the display when an operating parameter is selected.
A0017716
Enter key; calling up the operating menu, confirming the option/setting parameters in the
operating menu
A0017715
Selecting and setting/changing values in the operating menu; pressing the '-' and '+' keys
simultaneously takes the user back up a menu level. The configured value is not saved.
A0017714
9.13.1 Operating functions
The operating functions of the process display unit are divided into the following menus. The
individual parameters and settings are described in the "Commissioning" section.
If the operating menu is disabled by means of a user code, the individual menus and
parameters can be displayed but not changed. To change a parameter, the user code must be
entered. As the display unit can only display digits in the 7-segment display and not
alphanumeric characters, the procedure for number parameters is different to that for text
parameters. If the operating position contains only numbers as parameters, the operating
position is displayed in the 14-segment display and the configured parameter is displayed in
the 7-segment display. To edit, press the 'E'-button followed by the user code. If the operating
position contains text parameters, only the operating position is initially displayed in the 14-
segment display. If the 'E' button is pressed again, the configured parameter is displayed in the
14-segment display. To edit, press the '+' button followed by the user code.
Setup (SETUP) Basic device settings
Diagnostics (DIAG) Device information, display of error messages
Expert (EXPRT) Expert settings for device setup. The Expert menu is protected from editing by an access code
(default 0000).
9.13.2 Operating modes
The process display unit can be used in two different operating modes:
To Next Page
Loading...
