Endress+Hauser Waterpilot FMX21 - 14.17 Expert → Diagnosis

Description of device parameters Waterpilot FMX21
112 Endress+Hauser
14.17 Expert → Diagnosis
Diagnostic code
Write permission No write permissions. Parameter is read only.
Description Displays the diagnostic message with the highest priority currently present.
Last diag. code
Write permission No write permissions. Parameter is read only.
Description Displays the last diagnostic message that occurred and was rectified.
Note • Digital communication: the last message is displayed.
• Use the "Reset logbook" parameter to clear the messages listed in the parameter "Last
diag. code".
Reset logbook
Write permission Service engineers/Expert
Description Use this parameter to reset all messages of the parameter "Last diag. code" and the event
logbook "Last diag. 1" to "Last diag. 10".
Options • Cancel
• Confirm
Factory setting Cancel
Min. meas. press.
Write permission No write permissions. Parameter is read only.
Description Displays the lowest pressure value measured (peakhold indicator). You can reset this
indicator by means of the "Reset peakhold" parameter.
Max. meas. press.
Write permission No write permissions. Parameter is read only.