Endress+Hauser Waterpilot FMX21 - Cable Marking; Cable Mounting Screws; Cable Shortening Kit; Ma HART)

Waterpilot FMX21 Accessories
Endress+Hauser 119
15.4 Temperature head transmitter TMT182 (4 to 20 mA
HART)
• Temperature head transmitter 2-wire, configured for a measuring range of
–20 to +80 °C (–4 to +158 °F). This configuration offers a temperature range of 100 K
which can be easily mapped. Please note that the Pt100 resistance thermometer is
suitable for a temperature range of –10 to +70 °C (–14 to +176 °F)–10 to +70 °C.
• Order no.: 51001023 ordering information: Product Configurator order code for
"Accessories enclosed", option "PT"
The TMT182 temperature head transmitter is not designed for use in hazardous areas
incl. CSA GP.
15.5 Pt-100 resistance thermometer
Ordering information: Product Configurator order code for "Accessories mounted", option
"NB"
15.6 Cable mounting screws
Endress+Hauser offers a cable mounting screw for easy installation of the FMX21 and to
seal the measuring aperture.
• Order number for cable mounting screw:
– 52008264 (G 1½" A) Ordering information: Product Configurator order code for
"Accessories enclosed", option "PQ"
– 52009311 (NPT 1½") Ordering information: Product Configurator order code for
"Accessories enclosed" option "PR"
• Material
15.7 Terminals
• Four terminals in strip for terminal box, suitable for cable cross-section: 0.08 to 2.5 mm
2
(28 to 14 AWG)
• Order number: 52008938
The 4-terminal strip is not designed for use in hazardous areas incl. CSA GP.
15.8 Cable shortening kit
• The cable shortening kit is used to shorten a cable easily and professionally.
• Order number: 71222671, Ordering information: Product Configurator oder code for
"Accessories enclosed", option "PW" Associated documentation SD00552P/00/A6.
The cable shortening kit is not designed for the FMX21 with FM/CSA approval.
15.9 Cable marking
• To make installation easier, Endress+Hauser marks the extension cable if a customer-
specific length has been ordered
• Cable marking tolerance (distance to lower end of level probe):
Cable length < 5 m (16 ft): ±17.5 mm (0.69 in)
Cable length > 5 m (16 ft): ±0.2 %
• Material: PET, stick-on label: acrylic
• Immunity to temperature change: –30 to +100 °C (–22 to +212 °F)