Endress+Hauser Waterpilot FMX21 - Mounting the Waterpilot with a Mounting Clamp

Installation Waterpilot FMX21
18 Endress+Hauser
5.4 Mounting the Waterpilot with a mounting clamp
1
2
3
A0018793
1 Extension cable
2 Suspension clamp
3 Clamping jaws
5.4.1 Mounting the suspension clamp:
1. Installing the mounting clamp (item 2) . When selecting the place to attach the unit,
note the weight of the extension cable (item 1) and of the device.
2. Raise the clamping jaws (item 3). Hold the extension cable in position (item 1)
between the clamping jaws as illustrated in the diagram.
3. Hold the extension cable in position (item 1) and push the clamping jaws (item 3)
back down. Tap the clamping jaws gently from above to fix them in place.