Endress+Hauser Waterpilot FMX21 - Page 95

Waterpilot FMX21 Description of device parameters
Endress+Hauser 95
Example Add point, in this case between the 4th and 5th point for example
• Select point 5 via the "Line-numb" parameter.
• Select the "Insert point" option via the "Edit table" parameter.
• Point 5 is displayed for the "Line-numb" parameter. Enter new values for the "X-val" and
"Y-val" parameters.
Delete point, in this case the 5th point for example
• Select point 5 via the "Line-numb" parameter.
• Select the "Delete point" option via the "Edit table" parameter.
• The 5th point is deleted. All of the following points are pushed up one number i.e.
following deletion, the 6th point becomes Point 5.
Factory setting Current point
Tank description
Write permission Operators/Service engineers/Expert
Description Enter tank description (max. 32 alphanumeric characters).
Tank content
Write permission Operators/Service engineers/Expert
Description Displays the level value after linearization.