Additional Functions WirelessHART Fieldgate SWG70
104 Endress + Hauser
11.3 Firmware Upgrade (Web Server)
Firmware Upgrade allows new firmware to be downloaded to the Fieldgate.
1. Click Additional Functions => Firmware Upgrade to open the dialog:
2. Browse to the folder or location where the firmware package is to be found (*.ipk,
*.tar.gz)
3. Press to Upload the Package >>
– The following page appears:
4. Press the Install the Package >> button to install the firmware.
– To cancel the firmware upgrade, press Discard Upgrade.
5. The package will now be installed.
– The installation process may take a while.
– When the installation is finished, Installation Successfully Completed together
with a log is displayed on the screen.
6. After installation, Fieldgate SWG70 restarts with the new firmware.
– The network configuration of the old firmware is retained.
To Next Page
Loading...
