Operation WirelessHART Fieldgate SWG70
28 Endress + Hauser
6 Operation
6.1 Operating and display elements
Inside the fieldgate housing there are LED indicators, DIP switches and reset buttons. The
controls and indicators are accessible with open enclosure.
WARNING!
• If Fieldgate SWG70 is installed in a hazardous area Zone 2, you may only operate the DIP
switches and the keys and only connect or disconnect the cables in the absence of any
potentially explosive atmosphere or if the Fieldgate is not connected to the power supply.
Fig. 6-1: Operating and display elements
1 LEDs
2 Button P1
3 Button P2
4 DIP switches
1
2 3
4
To Next Page
Loading...
