Fieldgate configuration WirelessHART Fieldgate SWG70
48 Endress + Hauser
Disabling channels 1. Disable a channel by deactivating its check box in the Channel Blacklist.
– The number of remaining active channels must be odd.
– At least 5 channels must remain active.
2. Click Send to Device to transfer the updated blacklist settings to the Fieldgate.
– Fieldgate stores the updated blacklist: the updated settings do not apply until the
network is reformed.
3. Go to Additional Functions > Reset, and click Reform Network to apply the updated
channel blacklist. See Chapter 11.1 "Reset" on page 102.
To Next Page
Loading...
