Diagnostics WirelessHART Fieldgate SWG70
60 Endress + Hauser
Topology View parameters
Parameter Meaning
Traffic
Dotted line: Path is unused at the moment
Thin line: Path used by one third of connections
Medium lines: Path used by two thirds of connections
Thick line: Path used by all connections
Connection Quality
Signal Red: Signal stability 0 - 10% of maximum possible
Red: Signal stability 10 - 20% of maximum possible
Orange: Signal stability 20 - 30% of maximum possible
Gold: Signal stability 30 - 40% of maximum possible
Yellow: Signal stability 40 - 50% of maximum possible
Lime: Signal stability 50 - 60% of maximum possible
Light Green: Signal stability 60 - 70% of maximum possible
Lawn Green: Signal stability 70 - 80% of maximum possible
Bright Green: Signal stability 80 - 90% of maximum possible
Green: Signal stability 90 - 100% of maximum possible
Operating elements
Reset Zoom Resets the zoom to show everything
Refresh Updates the information on signal quality and traffic
Zoom rider – ------------ + Increases (+) or decreases (–) the magnification of the topology view
Horizontal image origin Indicates the position of the horizontal origin of the image
Vertical image origin Indicates the position of the vertical origin of the image
Resolution Sets the resolution of the image
Paths shown Selects the paths to be shown in the topology view
– All: all paths are shown
– In use: only those paths used by the network are shown
– Selected: the paths associated with a device are shown when the cursor is moved
to the said device
– None: No paths are shown
To Next Page
Loading...
