Endress+Hauser WirelessHART Fieldgate SWG70 - Page 93

WirelessHART Fieldgate SWG70 Engineering
Endress + Hauser 93
2. The Add-On Profile of the WirelessHART Fieldgate opens.
3. Enter the IP address of the WirelessHART Fieldgate in the "Ethernet Address" section of
the "General" tab.
Configuring the maximum number of HART devices
1. Select the "General" tab in the Add-On Profiles section of the WirelessHART Fieldgate.
2. Click the "Change" button under "Module Definition".
The "Module Definition" window opens. Use this dialog to configure specific parameters
for the cyclic EtherNet/IP connection and the number of HART devices.