Enerco Journey Series User Manual

This is an unvented gas-fired portable heater. It uses air (oxygen) from the area in which it is used. Adequate
combustion and ventilation air must be provided. Refer to page 3.
OPERATING INSTRUCTIONS AND OWNER’S MANUAL
www.enerco.com 888-849-1899
LANGUAGES INCLUDED:
• ENGLISH
• SPANISH
WARNING:
If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or loss
of life.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediatelycallyourgassupplierfromaneighbor’sphone.Followthegassupplier’sinstructions.
• If you cannot reach your gas supplier, call the fire department or a qualified service agency.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
CATALYTIC HEATER
Model # ECAT3LP • ECAT6LP • ECAT8LP
DO NOT OPERATE HEATER WITH DUST SHIELD IN PLACE
36880
PORTABLE PROPANE HEATER
FOR RECREATIONAL USE
FOR US SALE EXCEPT
MASSACHUSETTS
READ INSTRUCTIONS CAREFULLY: YOUR SAFETY IS IMPORTANT TO YOU AND TO
OTHERS. Read and follow all instructions. Place instructions in a safe place for future
reference. Do not allow anyone who has not read these instructions to assemble, light,
adjust or operate the heater.

Enerco Journey Series Specifications

General

Brand	Enerco
Model	Journey Series
Category	Heater
Language	English

Summary

Warnings

Carbon Monoxide and Asphyxiation Hazards

Early signs of CO poisoning, and risks from lack of ventilation and improper combustion.

Chemical Exposure Warnings

Fire or Explosion Hazard

Instructions on what to do if gas smell is detected, and warnings about flammable liquids.

General Safety Instructions

Ventilation and Enclosure Requirements

Fuel Gas Odor

Detecting and Responding to Gas Odors

Guidance on identifying fuel gas odor and immediate actions to take.

Gas Supply

LP Gas Cylinder Requirements

Heater Gas Connection and Operation

Installation

Wall Mounting Procedure

Air Supply

Oxygen Consumption and Ventilation Needs

Gas Connection

Ensuring Gas-Tight Connections

Procedure for checking and tightening gas connections and avoiding thread sealant.

Operation

Lighting Instructions

Step-by-step guide for safely lighting the heater, including pilot light procedures.

Shutdown Instructions

Procedure for safely turning off the heater and shutting off the gas supply.

Relighting Instructions

Guidance on what to do and check before attempting to relight the heater if it shuts off.

Service

Burner and Pilot Flame Inspection

Burner Assembly Removal Procedure

ODS and Valve Components Replacement

Procedure for removing and replacing the Oxygen Depletion Sensor and valve components.

Catalytic Pad

Catalytic Pad Function and Deterioration

Information on the catalytic pad's efficiency, common issues, and when replacement is needed.

Troubleshooting

Spark Electrode Issues

Diagnosing and resolving problems with the spark electrode not producing a spark.

Pilot Not Lighting or Staying Lit

Troubleshooting steps for pilot light issues, including gas supply and cleaning.

Main Burner Ignition Problems

Heater Shuts Off During Operation

Warranty and Parts Ordering

Replacement Parts and Hose Usage

Product Usage and Safety Warnings

Critical warnings about product use, including not cooking food and avoiding third-party accessories.