8
Assembly notes
1. Open the carton, put the main frame on the ground.
2. Proceed according to the drawings on the last pages of the manual.
Symbols shown in assembly instruction
A-1
A-2
Fasten nuts and bolts.
After all components and hardware have been assembled in current and
previous steps. Securely tighten all nuts and bolts.
NOTE: Do not over tighten any component with pivotal function.
Make sure all pivotal components are able to move freely.
Do not tighten all nuts and bolts in this step yet.
When fasten nuts and bolts symbol appeares in next step, then make
sure to fasten all bolts that have been installed.
Proper Training Clothes
Please make sure you always wear proper training shoes while working out. It is recommended that you wear training
appropriate exercise clothing’s that allow you to move freely whilst exercising.
Exercise Level
Please contact a physician before your exercise program. Immediately stop exercising if you feel any pain or tightness
in your chest, become short breathed of faint. Please contact your doctor before you start using your fitness product
again.
Check www.energetics.eu for detailed training instructions.
To Next Page
Loading...
