12
It is important that the handlebar and seat are set
at the correct height for your body. Ask your
instructor for assistance.
Handlebar adjustment - Adjusting the handlebar
height-Undo the adjuster knob that are located where
the handlebar post fits into the frame. Slide the
handlebar post up or down to the required height and
retighten the adjuster knob. Make sure it is securely
tightened and that there is no lateral or vertical
movement of the handlebar. The handlebar position
can also be adjusted forwards or backwards. Slide the
handlebar assembly forwards and backwards until you
reach the required position. Then securely re-tighten
the adjuster knob.
Seat adjustment – Undo the adjuster knob located
where the seat post fits into the frame. Adjust the seat
to the required height. Then retighten the adjuster
knob. The seat position can be adjusted forwards and
backwards. Undo the adjuster knob located directly of
the seat slider. Loosen the adjuster knob then slide the
seat to the required position. Then make sure the
adjuster knob tighten secure.
Saddle:
Make sure to tighten secure for both side of nut after
adjust the saddle position to prevent the saddle from
twisting side to side.
Emergency Brake:
Press down the knob of the Tension knob (31) to the
end completely for emergency STOP.
To Next Page
Loading...
