Do you have a question about the Energetics POWER RUN 4.9 and is the answer not in the manual?
Speed Range | 1 - 16 km/h |
---|---|
Maximum User Weight | 120 kg |
Display | LCD |
Foldable | Yes |
Programs | 12 |
Follow assembly, use original parts, suitable tools, stable surface, and adult supervision.
Consult physician, warm-up, use correct posture, be aware of hazards, and wear proper shoes.
Understand the Safety Key function for emergency stops and immobilization.
Ensure adequate clearance, proper power supply, and adhere to weight limits.
Protect floors, turn off power when not in use, and address unusual noises.
Attach handlebars to the uprights using provided bolts and washers.
Secure uprights to the base using bolts and attach caps.
Clip the water bottle holder onto the console housing until it snaps.
Adjust base frame knobs to level the treadmill on uneven ground.
Lift the deck from the rear until it locks securely in place.
Release the lock with your foot and slowly lower the deck.
Fold the deck up and lift the handlebar slowly for transport.
Press down the foot locker before unfolding for safe operation.
Insert the lock pin after folding to prevent the deck frame from dropping.
Push the deck frame and remove the lock pin to unfold the treadmill.
Keep children and pets away from the folded treadmill for safety.
Unplug power before cleaning. Use a soft, damp cloth and avoid abrasives or solvents.
Use a treadmill mat for easier cleaning and vacuum underneath weekly.
Check for lubrication every 4 weeks or 500 hours; use non-petroleum silicone.
Lift belt sides and spray silicone on the walking board, front to rear.
Avoid moist areas, check connections, use original spare parts, and clean sweat.
Adjust belt tension and centering using rear roller bolts as needed.
List of components for the computer console, housing, and base frame assembly.
Parts list for handlebars, uprights, incline tubes, and foot locks.
Components related to the motor assembly, driving belt, and wiring harness.
List of parts for the running deck, rollers, side rails, and control board.
Detailed list of screws, bolts, nuts, and washers included in the hardware pack.