3
COMPUTER INSTRUCTIONS
IMPORTANT
A. The console display will turn itself off automatically after the belt has stopped moving for five minutes.
B.The pulse function is for reference only, not to be used for medical purposes.
BUTTONS AND FUNCTIONS
START button (E)
Press the button to start the the quick start program or a pre-set program.
The initial speed is 0.8 km/h, incline 0%.
STOP/ENTER button (B)
Press to confirm program and preset function values under setting mode.
Press to quit preset program and function values after completing a single program.
Setting procedure: returns to beginning of setting mode before pressing the START key.
Press to stop exercise during workout time.
Speed up button (F)
Press the button to increase the speed or set the program.
Speed down button (A)
Press the button to decrease the speed or set the program.
Mode Button (C)
Press the button to switch between the display values.
Direct speed Button (D)
Press the button to get the desired speed directly.
Power incline switch (G)
To change the incline press up to increase and down to decrease.
To Next Page
Loading...
Need help?
General
