How to Charge
Plug the charging cradle upright into a
wall socket. (FIG. 1)
Place the LED nightlight onto the charging
cradle. Charge for 24 hours before first
use.
Complete charging time is minimum 10
hours thereafter. (FIG. 2)
On/Off and Flashlight Function Button
Flashlight: When the unit is unplugged from the wall, press the On/Off button to
turn the flashlight on. Press the On/Off button again to turn the flashlight off.
Press the On/Off button once again to illuminate the white LED on the front
panel.
NOTE: the unit automatically returns to Blue colour once power has returned or when the unit is unplugged and then
plugged back into the wall outlet.
PRODUCT SAFETY
Read and retain these instructions for future use. This nightlight is powered by a mains transformer adaptor.
Only use the light set with the transformer that has been supplied. Use of another transformer could damage your
light set. This transformer MUST ONLY BE PLUGGED INDOORS. Connect the light set to the supplied transformer and
plug the adaptor into a suitable mains supply socket.
Improper installation may result in the risk of fire, electric shock, or serious injury to persons.
Power plug must be removed before cleaning, servicing, maintenance and when moving from one location to
another.
Unplug from mains if not in use.
This is not a toy. Keep out of reach of children.
This appliance / product is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety. Children should be supervised so
that they do not play with the appliance.
Do NOT use outdoors.
Do NOT immerse in any liquid or allow liquids to come into contact with the unit.
Do NOT expose to extreme high or low temperatures.
To Next Page
Loading...