UG_EN_AR3_2020-12-17
Using the Arc
3
Fully Charge your Arc
3
before first use!
Welcome!
Space Heater
Microwave
Email us at support@energizerarc.comFor more information please visit www.energizerarc.com Call us Toll Free 1.877.528.3772
LCD Display
A-
B-
C-
D-
E-
F-
G-
H-
I-
J-
K-
Battery Charge
How much baery power is le.
Time Remaining
Run time remaining at the current power draw.
High Temperature Warning
It’s too hot! Cool down the baery.
Low Temperature Warning
It’s too cold! Warm up the baery.
Cooling Fan
The fan will run when the baery gets hot, this is normal.
Low Battery
The baery is geing low, recharge it.
AC Output
Indicates AC output is on.
USB Output
Indicates USB output is on.
USB Type-C Output
Indicates USB Type-C output is on.
DC Output
Indicates DC output is on.
Watt Meter
Current input or output in Was.
21 3
4 6
5
A CB D E
G H I J K
F
Hairdryer
Not Recommended
(Over 350W Consumption)
Kele
Circular Saw
Air Conditioner
*Repeat the same steps for USB & DC outputs.
USB Power
USB On/Off
USB Type-C
2x USB 3.0
Type-A
Fast Charge
1.
2.
3.
62X
GoPro
(4.4Wh)
22X
Smartphone
(12Wh)
8X
Tablet
(32Wh)
Example Devices
DC Power
Important!
Not permied
on aircra
Avoid extreme
temperatures
Avoid
dropping
Do not expose
to liquids
Dispose of baeries
according to
local regulations
AC
AC Power
AC Power
On/Off
110V
receptacle
110V
receptacle
1.
2.
3.
4X
Laptop
(62Wh)
3.5h
TV
(75W)
32h
Light
(8W)
Example Devices
DC
DC Power
On/Off
2x 5.5mm 12V
DC Ports
12V Cigarette
Port
1.
2.
3.
4h
Car Cooler
(60W)
2.5h
Vacuum
(120W)
2
Nights
CPAP
(25W)
Example Devices
Recharge your Arc
3
with a wall outlet,
vehicle cigarette
port, or the sun
using solar panels.
5h
AC Wall Plug
5-8h
Solar Panel
Input
5h
Vehicle Charger
1. Press and hold power button for 1 second to turn on the unit.
2. Press the AC button to power on the AC outlets.
3. The icon will appear on the display to show the output is on.
4. Plug in your devices and power up.
5. After use, press the AC button to power off the AC outlets.
6. To turn off all ports and power down press and hold the
power button for 1 second.
The power to Go.
Screen Brightness Emergency S.O.S Restart
Double click the power buon to
dim the screen. Single press to
brighten it back up.
Double press the LED buon to
engage the emergency strobe feature.
Single press again to turn it o.
Use a paperclip (or
similar) to reboot if
needed.
Power Buon
Press and hold for 1
second to turn the
unit on or o.
USB
Quick Start GuideQuick Start Guide
To Next Page
Need help?
General