ENERGY SISTEM TV1070/90 User Manual (English)

Questions and Answers:

I
ikaiserJul 31, 2025
Why is my ENERGY SISTEM TV1070/90 remote control not working?
- J
  Jeffery FischerAug 1, 2025
  If your ENERGY SISTEM LCD TV remote control isn't responding, several factors could be the cause. Ensure the device is plugged in and switched on. Make sure you're aiming the remote directly at the sensor on the front of the TV, and that nothing is blocking the path between the remote and the sensor. Also, verify that the batteries are inserted correctly, paying attention to the polarity. If the batteries are old, try replacing them.
J
Jonathan SmithAug 6, 2025
What to do if my ENERGY SISTEM TV1070/90 says no signal?
- A
  Aaron EstesAug 6, 2025
  If your ENERGY SISTEM LCD TV displays 'No signal found', the issue might be with your aerial connection. First, check that the aerial lead is securely connected. Then, inspect the aerial itself for any damage or misalignment. If you're still experiencing issues, it's possible that you are out of the digital signal area; in this case, you should check with your dealer.
D
Deanna SmithAug 13, 2025
How to restore picture and sound on ENERGY SISTEM LCD TV?
- C
  Christopher RuizAug 13, 2025
  If you're experiencing a lack of picture or sound on your ENERGY SISTEM LCD TV, you might be viewing an incorrect output. Try pressing the DTV/AV button, the SCREEN button, and the SPEAKER button to see if this resolves the issue.
J
James MartinAug 18, 2025
Why does my ENERGY SISTEM TV1070/90 picture have square blocks or freeze?