Need help?Do you have a question about the Energy indoor / outdoor loudspeaker and is the answer not in the manual?
Explains the unique switch that increases bass outdoors and protects speakers from overdrive.
Describes the 1/2" dome tweeter, its weather resistance, and high-frequency performance.
Details the 5-1/4" polypropylene woofer for smooth response and controlled midrange.
States compatibility with 8-ohm amplifiers and receivers for broad system integration.
Describes 5-way binding posts for secure electrical connection and distortion-free performance.
Explains the snap-on cover protecting connections from weather-induced corrosion.
Details materials selected for temperature extremes, rain, snow, and UV ray resistance.
Explains user-friendly connections and tapered cabinet shape for easy mounting.
Recommends high-quality speaker cable with connectors like spade lugs.
Discusses driving speakers to high levels with moderate power or large amplifiers.
Details steps for disassembling, cleaning, and masking speaker parts before painting.
Provides instructions for applying primer and finish paint to the cabinet and bracket.
Explains how to paint the grille without clogging holes to maintain sound quality.
Guides on how to carefully reattach the grille after painting.
Explains how speaker placement affects bass output by reinforcing frequencies.
Describes methods for attaching the speaker to walls, ceilings, or other surfaces.
Lists tools needed for mounting the speaker bracket securely.
Emphasizes using appropriate hardware and consulting professionals for safe mounting.
Provides step-by-step instructions for attaching the mounting bracket.
Guides on turning off equipment, connecting wires, and ensuring correct polarity.
Illustrates how to connect speaker wires to the positive and negative terminals.
Covers angling speakers for sound and tightening bracket knobs securely.
Offers advice on cleaning the speaker cabinets and grilles.
Specifies the recommended power range per channel for the amplifier.
States the nominal impedance of the speakers.
Provides the frequency range and tolerance of the speakers.
Details the speaker's sensitivity measurement.
Outlines the recommended gauge and length for speaker wire.
Lists the operating temperature range in Fahrenheit and Celsius.
Provides the physical dimensions of the speakers, with and without the bracket.
States the weight of the speaker and bracket assembly.
Explains what the warranty covers against manufacturing defects.
Details how to obtain service and contact information for warranty claims.
Advises users to check local warranty details for international coverage.
Stresses that warranty is void if voice coils are damaged by overpowering or clipping.
Explains how amplifier settings can lead to overpowering and damage speakers.
Defines clipping and warns that distorted sound indicates potential speaker damage.
To Next Page
General
