ENERMAX EAS01 - Device Functions; Power On;Off and Mode; Bluetooth Pairing; NFC Pairing

1. Power On / Off
Turn on/off the power by switch the buon to ON / OFF posion. When
turn on the power, a short welcome message (You enter the Bluetooth/ play
mode) will be played.
**Note:
Before using your EAS01, please fully charge the baery for beer performance.
2. Bluetooth Pairing
Enable your smart phone/tablet Bluetooth, search “EAS01” device, and add
this device. If paring is successful, a voice message of “Connecon is ok” will
be played, and the Bluetooth signal will change from flashing to light on.
**Note:
EAS01 can memorize up to 8 Bluetooth connected devices, and it can be
automacally connected to the nearest one.
3. NFC (Near Field Communicaon Technology) pairing
To pair the EAS01 via NFC, please enable your phone/tablet Bluetooch and
NFC, and tab your device with the NFC logo on EAS01. Your device should
detect EAS01 in seconds, and please add the EAS01 to complete the pairing.
4. AUX-in Input
EAS01 also accept the 3.5mm jack AUX-in for audio input. Please use the
provided 3.5mm audio cable to connect audio devices to EAS01 AUX-in port
, then it’s done.
**Note:
under AUX-in mode, press is for mute.
5. TF Card Play
Insert TF card to EAS01 TF (Micro SD) card slot , EAS01 will automacally
play music from TF card.
Funcon
7
9
4
2
5
- 7 -
EAS01