10
• Follow the lubrication scheme in
paragraph 6.1.
• Lubrication may influence torque
accuracy and life-time of the wrench.
Always clean and lubricate after usage
and store in the carrying case.
• Clean the cassette with each cassette
change and lubricate the lever surface
with Gleitmo 805 only.
6.1 Lubrication
Follow the scheme below. The icons
1 and
2
refer to parts or surfaces of the wrench in
illustration .
• Clean surface
1
and grease with
Gleitmo 805 only. Available at Enerpac as
Torque Wrench Grease EN-14010.
• Keep surface
2
clean and dry. Do not
lubricate.
IMPORTANT: Do not disassemble the
wrench unit (1) and the cassette (4). Do not
immerse these parts in oil, kerosene or other
cleaning liquid to prevent dirt from flushing in
and grease from being dissolved.
13
13
To Next Page
Loading...
Need help?
General
